Each year, millions of children and teenagers wear braces or clear aligners to straighten a crooked smile. But there may be a way to treat some of these bite problems and avoid braces—by intercepting the problem at an earlier age.
This can often be done if the bite problem stems from abnormal jaw development rather than misaligned teeth. An example of this occurs when the upper jaw growth outpaces the lower jaw, causing the upper teeth to protrude beyond the lower teeth. Aside from the effect on appearance, protruding front upper teeth may extend beyond the protection of the lip and be more prone to injury.
A device called a Herbst appliance could prevent this from happening. The top of the device has two hinged metal tubes that connect to elastic bands bonded to the back teeth on both sides of the upper jaw. The bottom also has tubes affixed in the same way to the bottom teeth, except they're slightly smaller and fit within the upper tubes.
The lower tubes sliding within the upper tubes produces slight pressure against the lower jaw to ease it forward. This gradually influences the lower jaw to grow at a pace equal with the upper jaw to decrease the chances of poor bite development. Unlike other corrective methods, the Herbst appliance fixed in place and out of the way won't interfere with sports or other physical activities.
An installed Herbst appliance may change a patient's sensations during swallowing, eating or speaking, but most children adapt to the changes within a few days. And, because the device can create challenges for keeping the back teeth clean, many dentists recommend adding a fluoride rinse to daily brushing and flossing as an added boost against tooth decay.
The Herbst appliance is most effective during the period of most rapid physical growth between the ages of 11 and 14, but if the teeth are already beginning to protrude it can be undertaken as early as 8 or 9. Either way, this important orthodontic tool could help address a complicated bite problem and reduce the need for more costly orthodontic treatment later on.
If you would like more information on early interventions for poor bites, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “The Herbst Appliance.”
Although teeth are quite durable, we can still lose them—even all of them—to disease or injury. The good news, though, is that we have effective ways to restore teeth after they're lost. One of these, the removable denture, has given people their teeth back for several generations. And with recent advances in technology, today's dentures are even better.
Although more advanced, today's dentures share the same basic structure as those from a century ago: prosthetic (false) teeth set in a plastic resin colored to resemble the gums. The traditional denture is molded to fit snugly over an individual patient's alveolar jaw ridges, which once supported the former natural teeth. The denture stays in place primarily through a suction effect between the denture and the ridges.
Modern technology, though, has greatly improved today's dentures. Digital imaging can be used to generate highly accurate impressions of the dental ridges that can lead to denture bases with better fit. Dentists using photographs of the patient, especially in earlier years, are better able to identify facial landmarks, which enables them to position the new teeth to more closely recreate the patient's former smile.
These technological aids now help dentists to create more attractive dentures with better support and comfort. But the fit that makes this possible may not last due to a particular weakness inherent in traditional dentures—continuing bone loss. When teeth are missing, the underlying jawbone can lose bone volume over time. Dentures don't stop this process and can accelerate it due to constant friction and pressure on the dental ridges.
But a new modification incorporating dental implants with dentures can help solve these problems. By placing a few strategically positioned implants in the jawbone that then connect with the denture, the appliance not only gains more stability, but also produces less pressure on the dental ridges. In addition, bone cells naturally grow and adhere to the titanium implant posts, which helps to stop or slow bone loss.
If you've experienced total tooth loss, dentures are an affordable and effective option. Thanks to modern dental advances, you can get back the smile and dental function you once lost.
If you would like more information on denture restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Removable Full Dentures.”
If you're well past your teen years, you probably have several reasons for not straightening your crooked smile: the expense, the time and the embarrassment of being a 30-, 40- or 50+- something wearing braces. But we have five reasons why adult orthodontic treatment can be a smart choice: Tom Cruise, Kathy Bates, Carrie Underwood, Danny Glover and Faith Hill.
That's right: Each of these well-known entertainers and performers—and quite a few more—underwent treatment to improve a poor dental bite. And not as teenage unknowns: Each on our list wore braces or clear aligners as famous adults (the paparazzi don't lie!).
Here are a few of the reasons why these celebrities chose to change their smile through orthodontics—and why you can, too.
Age isn't a factor. Straightening misaligned teeth isn't reserved only for tweens and teens—there are a growing number of adults well into their middle and senior years undergoing orthodontic treatment. As long as your teeth are relatively sound and your gums are healthy, it's altogether appropriate to undergo bite correction at any age.
A boost to your dental health. Gaining a more attractive smile through orthodontics is in some ways an added benefit. The biggest gain by far is the improvement straightening your teeth can bring to your long-term health. Misaligned teeth are more difficult to keep clean of dental plaque, which can increase your disease risk. They also may not function as well as they should while chewing food, which can affect your digestion.
Traditional braces aren't the only way. If the thought of displaying all that hardware makes you cringe, it's not your only option. One of the most popular alternatives is clear aligners, custom plastic trays that are nearly invisible on your teeth—and you can take them out, too. Another method growing in popularity are lingual braces: All the hardware is behind the teeth and thus out of sight. And you can, of course, opt for traditional braces—just ask Tom Cruise!
Oh, yes—a new smile! Orthodontics was truly the first “smile makeover.” It can improve your appearance all by itself, or it can be part of a comprehensive plan to give you an entirely new look. While the gains to your health are primary, don't discount what a more attractive smile could do for you in every area of your life.
The best way to find out if orthodontics will work for you is to visit us for an initial exam and consultation. Just like our A-list celebrities, you may find that orthodontics could be a sound investment in your health and self-confidence.
If you would like more information about orthodontic treatments, please contact us or schedule an appointment. To learn more, read the Dear Doctor magazine articles “Orthodontics for the Older Adult” and “The Magic of Orthodontics: The Original Smile Makeover.”
Do-It-Yourself (DIY) is a deeply held American trait for building, renovating or repairing things without the services of a professional. The Internet has only made this tradition easier: There are scores of videos showing people how to do things on their own like build a deck, fix a dryer or bake an award-winning soufflé.
But some things are best left to the experts, which if you tried to do using too little knowledge or a lot less training could turn out disastrous. A prime example is becoming your own orthodontist and using dubious home methods to straighten your teeth. If that sounds preposterous, the American Association of Orthodontists recently reported it does happen, with one in ten of their members saying they have treated patients who attempted their own smile-straightening projects.
Often found on social media, these methods usually involve household items like rubber bands or dental floss to straighten teeth. Like other forms of DIY, the object is to save money. In the end, though, these self-orthodontic methods could result in dental damage that could cost much more to repair (if indeed it's repairable) than what might have been spent with professional orthodontics in the first place.
Utilizing extensive training, experience and artistry, orthodontists work with the mouth's natural ability to move teeth in a precise manner for a planned outcome. They carefully consider each individual patient's jaw and facial structures, along with the severity and complexity of their bite problem, as they design and implement a treatment plan involving braces, clear aligners or other orthodontic appliances.
A rigged homemade device to move teeth can't adequately take these factors into account. As a result, you may be risking permanent gum and bone damage—and you may even lose teeth in the process. Even if repairable, such damage could require oral surgery, cosmetic dentistry or more extensive orthodontic procedures.
In the end, you're highly unlikely to be successful at DIY orthodontics—and you won't save any money. A healthy and beautiful smile is well worth the cost of professional, high-quality orthodontics.
Orthodontics, veneers and other cosmetic dental techniques can turn a less than perfect smile into a beautiful one—but not always very quickly. For example, porcelain veneers can take weeks from planning to installation, including the meticulous work of an outside dental lab to produce veneers that look natural as well as beautiful.
But you may be able to take advantage of another approach, one that often takes no more than a couple of dental visits. Called direct veneers, it's actually a process of bonding and sculpting life-like composite materials to teeth that are heavily stained, chipped or that contain tiny crevices called “craze lines.”
Unlike the similarly-named traditional method, direct veneers don't involve the creation of layered porcelain veneers fashioned by a dental lab. But this newer process is similar to the older one in that some of the enamel must be removed from the teeth in question to provide a suitable surface for the composite material to adhere. This alteration will be permanent, requiring a restorative covering on the treated teeth from then on.
Right before this preparation, though, a dentist typically makes an impression of the patient's mouth. This will be the basis for creating the procedural plan for the dental work, particularly a “trial smile” from similar composite material that can be applied to the patient's teeth before actual restoration work begins. This temporary application gives both patient and dentist an opportunity to visualize the final look, and make needed adjustments in color and shaping.
Once the work plan is finalized, the patient then returns for the actual restoration procedure. The dentist begins by applying and bonding the composite material to the prepared teeth. Then, using a drill and manual instruments, the dentist shapes and smooths the material into a tooth-like appearance that blends with other teeth. The procedure can take a few hours, but it can usually be completed during a single visit.
Although direct veneers may not last as long as porcelain veneers, the process is less costly and requires less time to complete. Direct veneers could be an economical solution for achieving a more attractive smile.
If you would like more information on direct veneers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic with a firsthand patient account by reading the Dear Doctor magazine article “A New Smile With Direct Veneers.”
This website includes materials that are protected by copyright, or other proprietary rights. Transmission or reproduction of protected items beyond that allowed by fair use, as defined in the copyright laws, requires the written permission of the copyright owners.